Tilbud!

Arduino IDE starter kit med blant annet LED-ring, IR og andre sensorer – NodeMCU/ESP8266

kr 390,00 inkl. mva

På lager og sendes omgående! (2)

Klikk her om du har funnet varen billigere et annet sted!

7000000054990 Produktnr: S0114-X002LKKJ5T Kategorier: , , ,

Beskrivelse

I boksen følger det med NodeMCU som støtter Arduino IDE, samt LED ring, sensorer som, PIR, lyd, lys, IR/infrarød, fjerkontroll osv. Se bilder og videre tekst.

  • LED Ring for Arduino Kits: ESP8266 obtains data from Internet and 3 sensors,controls the LED Ring to change different colors and displays in different modes.Mobile phone or infrared controller can remotely control ESP8266 to switch different functions: FlashLight, Analog Clock, Music Reactive, Warning Light, Sound/ Light Reactive, Human Detection LED.Program developed with Arduino IDE
  • ️️️【LED Ring】IC WS2812B control trichromatic color of 24 LED RGB pixel can realize 256 highlighted, complete 16777216 colors of all true color display.Single-wire communication.Intelligent reverse polarity protection, power supply reverse polarity will not damage the IC. Compatible with Adafruit NeoPixels LEDs.Works great with Arduino, Raspberry Pi,etc.
  • ️️️【ESP8266】:CP2102 chip inside,Micro USB,4MB flash,full I/O port and wireless 802.11 supported IOT platform compatible for Arduino.【IR Controller】:Consists of infrared remote control and 38KHz infrared receiver module.NOT INCLUDE “CR2025 BATTERY”!with 20 function keys.Transmit distances <8 meters.Effective Angle: 60°.【Light Sensor】Can detect the brightness and the ambient light intensity.Adjustable sensitivity.3.3V-5V Voltage.DO digital switching 0/1 outputs and AO analog voltage output
  • 【HC-SR501】:When someone approach human infrared PIR body sensor,output range High,when people leave,output Low.Not repeat/repeatable 2 trigger mode.Sensitivity and Time Delay is adjustable.Sensing Angle <100°.【Sound Sensor】: built-in capacitive electret microphone.can identify presence or absence of sound.When sound intensity exceed a certain threshold, output low signal light Off, Otherwise output High light On.Turn the spin button on the sensor board adjust the sensitivity.

 

Important:
⭐Kits designed for Arduino IDE
⭐All components have been soldered
⭐IR controller not contain CR2025 battery

Features:
FlashLight: LED Ring lights up like flashlight.Light intensity and 256x256x256 colors can be adjusted
Warning Light: Simulate warning light.emits blue and red light alternately in loop.Time interval frequency adjustable
Music Reactive: LED Ring “hears” the high or low beats of the music,dynamically turn on/off the number of LED lights.LED Strip Light will “dance” to the rhythm and emit lights of different colors randomly
Analog Clock: LED Ring uses ESP8266 to obtain local real-time on the Internet(Can adjust to your location).And hour and minute hands are displayed on the LED “Clock Dial”
Sound Reactive: When LED ring “hear” a certain intensity of sound,emit different colors light
Light Reactive: When LED ring “see” a certain intensity of light,emit different colors light
Human Detection: When LED ring “detects” someone approaching, it can emit light of different colors.person leaves,light turns off

Package List:
1x 24 Bit RGB WS2812B LED Ring
1x ESP8266-12E
1x HC-SR501 Infrared IR Sensor
1x Sound Sesnsor
1x Light Sensor
1x USB Cable
1x IR Receiver,Controller(NO Battery)
10x Female to Male Dupont Cable
10x Female to Female Dupont Cable

Brand

ideaSpark

Tilleggsinformasjon

Vekt 0,300 kg
Dimensjoner 10 × 5 × 4 cm
7000000054990

Omtaler

Det er ingen omtaler ennå.

Bli den første til å omtale “Arduino IDE starter kit med blant annet LED-ring, IR og andre sensorer – NodeMCU/ESP8266”

Din e-postadresse vil ikke bli publisert. Obligatoriske felt er merket med *

×






Skriv inn din epostadresse så vi kan sende deg en mail når varen er på lager:
X
0
    0
    Handlekurv
    Tøm handlekurvTilbake til butikk
      Calculate Shipping
      Apply Coupon