Arduino LilyPad Main Board ATmega328P 16MHz

kr 79,00 inkl. mva

På lager og sendes omgående! (3)

Klikk her om du har funnet varen billigere et annet sted!

7000000058158 Produktnr: 2201-LILLY Kategorier: , , Stikkord: , , ,

Beskrivelse

Sy Arduino rett på tekstiler! LilyPad Arduino er designet for e-tekstiler og “wearables” prosjekter. Den kan sys på stoff og lignende, sensorer og aktuatorer med ledende tråd. Eksempel på prosjekt:

Flat og liten enhet som kan brukes i de fleste Arduino prosjekter.

The LilyPad Arduino is designed for e-textiles and wearables projects. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread.

The LilyPad Arduino Main Board is based on the ATmega168V (the low-power version of the ATmega168) or the ATmega328V. The LilyPad Arduino was designed and developed by Leah Buechley and SparkFun Electronics.

In the Getting Started section, you can find all the information you need to configure your board, use the Arduino Software (IDE), and start to tinker with coding and electronics. SparkFun Electronics has a range of accessories for use with the LilyPad Arduino.

Microcontroller ATmega168 or ATmega328V
Operating Voltage 2.7-5.5 V
Input Voltage 2.7-5.5 V
Digital I/O Pins 14
PWM Channels 6
Analog Input Channels 6
DC Current per I/O Pin 40 mA
Flash Memory 16 KB (of which 2 KB used by bootloader)
SRAM 1 KB
EEPROM 512 bytes
Clock Speed 8 MHz

Warning: Don’t power the LilyPad Arduino with more than 5.5 volts, or plug the power in backwards, you’ll kill it.

Brand

Elkim

Omtaler

Det er ingen omtaler ennå.

Bli den første til å omtale “Arduino LilyPad Main Board ATmega328P 16MHz”

Din e-postadresse vil ikke bli publisert. Obligatoriske felt er merket med *

×






Skriv inn din epostadresse så vi kan sende deg en mail når varen er på lager:
X
0
    0
    Handlekurv
    Tøm handlekurvTilbake til butikk
      Calculate Shipping
      Apply Coupon