Tilbud!

Tilpasset Arduino UNO WiFi R3 med ESP8266 og 32Mb minne

(3 omtaler)

kr 149,00 inkl. mva

På lager og sendes omgående! (8)

Klikk her om du har funnet varen billigere et annet sted!

7000000058493 Produktnr: 0801-UNOWIFI-AA328 Kategorier: , , , Stikkord: , ,

Beskrivelse

Dette er en tilpasset Arduino UNO WiFi R3 med ESP8266 og 32Mb minne er en tilpasset utgave av den populære Arduino UNO, med en innebygd ESP8266 WiFi-modul og 32Mb minne som gir deg muligheten til å koble til trådløse nettverk og lagre data. Dette utviklingskortet har en ATmega328P-mikrokontroller og en USB-TTL CH340G-seriell tilkobling som gir deg enkel tilkobling til datamaskinen for programmering eller overføring av data.

ESP8266 WiFi-modulen gir deg muligheten til å koble til trådløse nettverk og bruke ulike protokoller som TCP/IP. Med 32Mb minne har du god lagringskapasitet til å lagre data eller programvare, og det gir deg muligheten til å bruke kortet som en datalogger eller server.

Arduino UNO WiFi R3 med ESP8266 og 32Mb minne er kompatibelt med Arduino-programvare og gir deg muligheten til å programmere kortet med en rekke forskjellige programmeringsspråk, som for eksempel C++, Python, eller JavaScript. Dette gjør det enkelt å integrere kortet i prosjekter som krever kommunikasjon mellom kortet og datamaskinen.

Samlet sett er Arduino UNO WiFi R3 med ESP8266 og 32Mb minne et kraftig og allsidig utviklingskort som gir deg muligheten til å utforske en rekke forskjellige prosjekter. Med muligheten til å koble til trådløse nettverk og lagre data, og støtte for en rekke forskjellige programmeringsspråk, er dette kortet en perfekt plattform for å utforske ulike applikasjoner og løsninger.

RobotDyn UNO (tilsvarende Arduino UNO) med integrert Wifi ESP8266 chip. WiFi R3 ATmega328P + ESP8266 (32Mb memory) USB-TTL CH340G for Arduino.

Description:
Model Number: UNO+WiFi-R3-AT328-ESP8266-32MB-CH340G
is_customized: Yes
Brand Name: RobotDyn
Supply Voltage: 6~9V recommind
Type: Logic ICs
Condition: New
MCU: ATmega328
WiFi MCU: ESP8266
USB-converter: CH340G
PinOut Uno: Uno R3
UNO+WiFi R3 ATmega328P+ESP8266 (32Mb memory), USB-TTL CH340G. Compatible for Arduino Uno, NodeMCU, WeMos ESP8266

Package Included:
1PC*UNO+WiFi R3 ATmega328P+ESP8266 (32Mb memory) USB-TTL CH340G For Arduino


It is a customized version of the classic ARDUINO UNO R3 board. Full integration of microcontroller Atmel ATmega328 and IC Wi-Fi ESP8266 with 32 MB flash memory, and USB-TTL converter CH340G on one board. All modules can work together or independently.

 

On the board where the switch of mode of operation with 8 position

 

Switch status and mode selection:

1 2 3 4 5 6 7 8
CH340 connect to ESP8266 (upload sketch) OFF OFF OFF OFF ON ON ON NoUSE
CH340 connect to ESP8266 (connect) OFF OFF OFF OFF ON ON OFF NoUSE
CH340 connect to ATmega328 (upload sketch) OFF OFF ON ON OFF OFF OFF NoUSE
Mega328+ESP8266 ON ON OFF OFF OFF OFF OFF NoUSE
All modules work independent OFF OFF OFF OFF OFF OFF OFF NoUSE

(Dette er altså et multikort med både ESP8266 og ATmega328 (Arduino UNO mikrokontrolleren. Når man skal laste opp kode, kan man gjøre det til ett av kortene om gangen. Derfor kan man velge om USB serielladapteret (CH340) skal kobles til ESP8266, eller ATmega328 (Arduino UNO) kontrolleren. Begge kortene kan så samarbeide ved at DIP 1 og 2 er ON.)

After choosing the mode of the board can proceed to setting up the IDE

It is important that when the ESP8266 module is programming, it is necessary to press the button “ESP Reboot”

To begin open the Arduino IDE programming environment and go to settings

Then in the window that appears in the row Additional Boards Manager URLs (marked in red) insert http://arduino.esp8266.com/stable/package_esp8266com_index.json link for installation in Arduino IDE additional scripts that would work with the modules ESP8266, and click OK

Then go to the Tools> Board> Boards Manager

In the window that appears, scroll through the list down to the script esp8266 by ESP8266 Community and click.

In the lower right corner will be able to select the version of the software, select the version 2.1.0 (the newest) and click the Install button

After installation, close the window and go to Tools> Board and see the list of available devices on the chip programming ESP8266

Next, you need to select the card as shown in the picture (Generic ESP8266 module)

Select the upload speed – 115200

 

==========test sketch===========

void setup()

{ Serial.begin(115200);

pinMode(14,OUTPUT);

delay(500);

Serial.println(“AT+CIPMUX=1”);

delay(2000);

Serial.println(“AT+CIPSERVER=1,5000”);

delay(2000);

Serial.println(“AT+CIPSTO=3600”);

delay(2000); }

void loop()

{ while(Serial.available())

{ char Rdata;

Rdata=Serial.read();

if(Rdata==’A’|Rdata==’a’)

{ digitalWrite(14,HIGH);

delay(50); }

else if(Rdata==’B’|Rdata==’b’)

{ digitalWrite(14,LOW);

delay(10);

digitalWrite(14,HIGH);

delay(10);

digitalWrite(14,LOW); }

else

{ digitalWrite(14,LOW); } } }

Brand

Elkim

Tilleggsinformasjon

Vekt 0,03 kg
Dimensjoner 7,5 × 5,5 × 1,3 cm
7000000058493

3 omtaler for Tilpasset Arduino UNO WiFi R3 med ESP8266 og 32Mb minne

  1. h.rosano (bekreftet eier)

    Overall you get great functionality. However it was not straight forward to program. It took me some time to understand both controllers and get them to communicate.

  2. Kai Vidar Dohme (bekreftet eier)

  3. Elias Tverfjell

    Lager et overvåkningskamera med arduini men kamera og wifi modulen passer ikke på en vanlig arduino uno. Denne er perfekt.

Skriv en omtale

Din e-postadresse vil ikke bli publisert. Obligatoriske felt er merket med *

Schematics

PINOUT

DIMENTIONS

It is a customized version of the classic ARDUINO UNO R3 board. Full integration of microcontroller Atmel ATmega328 and IC Wi-Fi ESP8266 with 32 MB flash memory, and USB-TTL converter CH340G on one board. All modules can work together or independently.

 

On the board where the switch of mode of operation with 8 position

 

Switch status and mode selection:

1 2 3 4 5 6 7 8
CH340 connect to ESP8266 (upload sketch) OFF OFF OFF OFF ON ON ON NoUSE
CH340 connect to ESP8266 (connect) OFF OFF OFF OFF ON ON OFF NoUSE
CH340 connect to ATmega328 (upload sketch) OFF OFF ON ON OFF OFF OFF NoUSE
Mega328+ESP8266 ON ON OFF OFF OFF OFF OFF NoUSE
All modules work independent OFF OFF OFF OFF OFF OFF OFF NoUSE

(Dette er altså et multikort med både ESP8266 og ATmega328 (Arduino UNO mikrokontrolleren. Når man skal laste opp kode, kan man gjøre det til ett av kortene om gangen. Derfor kan man velge om USB serielladapteret (CH340) skal kobles til ESP8266, eller ATmega328 (Arduino UNO) kontrolleren. Begge kortene kan så samarbeide ved at DIP 1 og 2 er ON.)

After choosing the mode of the board can proceed to setting up the IDE

It is important that when the ESP8266 module is programming, it is necessary to press the button “ESP Reboot”

To begin open the Arduino IDE programming environment and go to settings

Then in the window that appears in the row Additional Boards Manager URLs (marked in red) insert http://arduino.esp8266.com/stable/package_esp8266com_index.json link for installation in Arduino IDE additional scripts that would work with the modules ESP8266, and click OK

Then go to the Tools> Board> Boards Manager

In the window that appears, scroll through the list down to the script esp8266 by ESP8266 Community and click.

In the lower right corner will be able to select the version of the software, select the version 2.1.0 (the newest) and click the Install button

After installation, close the window and go to Tools> Board and see the list of available devices on the chip programming ESP8266

Next, you need to select the card as shown in the picture (Generic ESP8266 module)

Select the upload speed – 115200

 

==========test sketch===========

void setup()

{ Serial.begin(115200);

pinMode(14,OUTPUT);

delay(500);

Serial.println(“AT+CIPMUX=1”);

delay(2000);

Serial.println(“AT+CIPSERVER=1,5000”);

delay(2000);

Serial.println(“AT+CIPSTO=3600”);

delay(2000); }

void loop()

{ while(Serial.available())

{ char Rdata;

Rdata=Serial.read();

if(Rdata==’A’|Rdata==’a’)

{ digitalWrite(14,HIGH);

delay(50); }

else if(Rdata==’B’|Rdata==’b’)

{ digitalWrite(14,LOW);

delay(10);

digitalWrite(14,HIGH);

delay(10);

digitalWrite(14,LOW); }

else

{ digitalWrite(14,LOW); } } }

×






Skriv inn din epostadresse så vi kan sende deg en mail når varen er på lager:
X
0
    0
    Handlekurv
    Tøm handlekurvTilbake til butikk
      Calculate Shipping
      Apply Coupon